Viper Foiling/Convertible

Length: 5.0 m - Width: 2.5 m (road gauge) - Masting: 8.55 m - Weight: 150 kg

(in Foiling configuration) - Sail area: 18.7 m2 - Spinnaker 17.5 m2

Price: 24.000€ (replacement value 32.500€)

Regularly maintained boat, optimized for regattas

Several regattas between 2021 and 2023 (Raid des baleines, Raid Emeraude, Costarmoricaine, Raid des oiseaux, etc...)

Stored under cover in hangar for wintering.

Boat sold for conversion to F18 Akurra.

• Epoxy glass-foam sandwich hulls with white gelcoat finish. Eva foam deck anti-skid.
• Daggerboard and foil wells.
• Aluminum wing mast, adjustable spreaders, adjustable lozenge tension by bolt under the mast foot, aluminum mast foot including secure matting system, and quick rotation adjustment. Harken turret (2023) for spinnaker halyard.
• 3 mm monotor shroud, Sta Master turnbuckle.
• 4 adjustable trapezes (2023)
• On stern beam: Harken 10-strand mainsail hoist, Harken mainsail traveler with turret on beam.
• Heavy-section aluminum front beam, equipped with adjustable martingale, and secure matting system.
• On the front beam: Harken self-tacking jib track (2023), integrated 16-strand mainsail cunnigham system, 2 Harken jib sheet turrets, 2 spinnaker sheet return blocks, clamcleat for jib halyard adjustment. Spinnaker tacking system integrated into forward beam.
• On the hulls: Winch pulleys for spinnaker sheets, 2 cleats for mast rotation adjustment.
• Grey Mesh luff trampoline, equipped with 3 rappelling straps (2 side straps, 1 central Y-shaped rear strap), and a halyard pocket.
• Double-layer trampoline underside integrates all systems between the 2 trampoline layers, enhancing aerodynamics.
• Spinnaker pole with spinnaker feeder system, aluminum boom with adjustable foot, adjustable aluminum crossbar, fixed carbon stick.
• 7-batten forced-profile mainsail (2021-very good condition) and 3-batten forced-profile jib (2021-good condition) in white Pentex.
• 2 silicon polyester asymmetrical spinnakers (2021), one blue in specific flat cut for flying boats (very good condition), the other red in standard cut (good condition)
• Carbon epoxy rudder heads, carbon epoxy rudder blades with removable G10 risers (very good condition) - rudder covers. Rudder rake adjustment
• Carbon epoxy Z-shaped foils - foil cover, rake adjustable by coupled strap system (very good condition).
• Carbon daggerboards, daggerboard covers and lifting straps (good condition)
• Removable daggerboard well covers, foil well covers, allowing the boat to be used for foiling, or with daggerboards.
• Launching: large-wheel launch trailer
• Ber rear foam support
• Integral Viper cover